Insight into fouling behavior of PVDF hollow fiber membranes caused by dextran with different pore s
Insight into fouling behavior of PVDF hollow fiber membranes caused by dextran with different pore size distributions
Zeng, Kailiang Zhou, Jie Cui, Zhaoliang Zhou, Yue Shi, Chuan Wang, Xiaozu Zhou, Liyue Ding, Xiaobin Wang, Zhaohui Drioli, Enrico
AbstractMembrane fouling are the key problems that occur in membrane process for water treatment. However, how membrane microstructure influences the fouling behavior is still not clear. In this study, fouling behavior caused by dextran was deeply and systematically investigated by employing four PVDF membranes with different pore sizes, ranging from 24 to 94 nm. The extent of fouling by dextran was accurately characterized by pore reduction,flux decline, and the change of critical flux. The result shows that membrane with smallest pore size of 24 nm experienced the smallest fouling rate and the lowest fouling extent. As the membrane pore size increased, the critical flux ranges were 105–114, 63–73, 38–44 and 34–43 L/(m²·hr), respectively. The critical flux and fouling resistances indicated that the fouling propensity increases with the increase of membrane pore size. Two pilot membrane modules with mean pore size of 25 nm and 60 nm were applied in membrane filtration of surface water treatment. The results showed that serious irreversible membrane fouling occurred on the membrane with pore size of 60 nm at the permeate flux of 40.5 L/(m²·hr). On the other hand, membrane with pore size of 25 nm exhibited much better anti-fouling performance when permeate flux was set to 40.5, 48 and 60 L/(m²·hr).
Insight into fouling behavior of PVDF hollow fiber membranes caused by dextran with different pore size distributions. Available from: https://www.researchgate.net/publication/316534856_Insight_into_fouling_behavior_of_PVDF_hollow_fiber_membranes_caused_by_dextran_with_different_pore_size_distributions [accessed Jul 14, 2017].